Skip to main content

Buy now pay later options available with &

DESCRIPTION

EGR & CAT CLEAN+ is a new generation, low volatility, professional automotive cleaning product that effectively cleans and prevents build-up of deposits that block emission control devices such as catalytic converters and exhaust gas recirculation (EGR) systems. It contains non-flammable ingredients that will pass through to the exhaust cycle and clean these components.

Application

EGR & CAT CLEAN+ is designed for use in all 4, 6 & 8+ cylinder, multi-cam, multi-valve including VVT, naturally aspirated, supercharged & turbocharged engines. It can be used in high performance and standard engines as well as in competition and normal on/off road use. It is not suitable for use in 2 Stroke engines.

EGR & CAT CLEAN+ cleans deposits from intake valves, fuel injectors and combustion chambers for easier starts, faster acceleration, better airflow and increased efficiency. It cleans and prevents harmful deposits forming in catalytic converters, cleans EGR passageways with regular use and also cleans oxygen sensors for smoother idling and running.

How to Use

USE ONLY AS DIRECTED ON VEHICLES IN SOUND MECHANICAL CONDITION

NORMAL FUEL ADDITIVE USE

  • For routine and preventative maintenance, add EGR & CAT CLEAN+ (ECC+) directly to the fuel at a dosage rate of approximately 2-3%. Run the engine to normal operating temperature and then for a further 10 minutes to clean the internals of the fuel pump, the fuel injectors or carburetor, the spark plugs where fitted, and the top piston rings. It will also remove any condensed water from these parts of the system. Due to the low flammability of ECC+, do not add to the fuel tank with lower than 15 Litres of fuel and do not add directly into fuel filter.
  • The can is a one-dose system. Empty the entire can into approximately 20-25 litres of fuel to enable it to remain concentrated as it goes through the cycle. Normally one treatment is sufficient to clean the system.

SERVICE MAINTENANCE - FOR PROFESSIONAL USE ONLY

  1. For more intense cleaning of the O2 sensor, exhaust gas recirculation valve, catalytic converter or particulate filter; connect a flexible tube with a tap (e.g. vacuum pipe) from the inlet manifold into the can of ECC+. Alternatively, the product can be poured directly into a pump spray bottle and sprayed directly into the vacuum pipe.
  2. Run the engine at approx. 2000 to 3000 RPM and open the tap or commence spraying at short intervals to draw the product into the areas where it will start to work and give the above benefits. The engine could stall – this is because ECC+ is not a fuel. If the engine speed drops sharply i.e. below 700 RPM, close the tap or stop the spray and reduce the application speed or increase the interval between applications. This signifies that the product is starting to do its job.
  3. Leave the ECC+ in the system and remove the can of ECC+ and reconnect the vacuum pipe.
  4. Turn the engine over until it starts – this may take several minutes as the ECC+ is replaced by fuel from the fuel tank. The unburned ECC+ will pass the O2 sensor and clean it. It will also clean the exhaust gas recirculation valve, catalytic converter and particulate filter.
  5. Procedures 2-4 may be repeated to ensure sufficient product is drawn into the system to treat all the components.

Vehicle & Fuel Types

EGR & CAT CLEAN+ is suitable for use in passenger cars and light commercial vehicles and can be used with vehicles running on Petrol/LPG, and E10. Suitable for use in Hybrid vehicles.

FEATURES

  • Powerful low cost alternative to costly repairs
  • Reduces exhaust emission
  • Increases engine performance and improves fuel economy
  • Removes deposits from injectors, reducing misfire events
  • Cleans catalytic converters, reducing harmful build up
  • Cleans EGR passageways with continued use
  • Cleans oxygen sensors to smooth rough idling
  • Reduces CO, HC, and NOx emissions
  • Compatible with petrol/LPG and E10 fueled engines.

Product Details

SPECIFICATIONS

SKU PSECC0005
Brand Penrite
Shipping Weight 0.5000kg
Shipping Width 0.120m
Shipping Height 0.150m
Shipping Length 0.060m
Shipping Cubic 0.001080000m3

About the Brand

Penrite Oil

 

Penrite, a proudly Australian-made and family owned company for nearly 100 years, is thrilled to announce its re-certification with Australian Owned™. This significant milestone reinforces Penrite's unwavering commitment to supporting local communities, businesses, and the values that define Australia.

As a brand that has thrived in Australia’s unique and challenging conditions, Penrite is dedicated to empowering other Aussie businesses and showcasing the importance of keeping Australian ownership and local production at the forefront of our economy. By joining the Australian Owned™ program, Penrite continues its mission to create jobs, drive innovation, and invest in the long-term prosperity of the nation.

Read more...

Visit us at our store!

We are here to help you with all your earthmoving and agricultural needs. Visit us at our store today and let's get you on the path to project success!

Our Headquarters

At Bunyip Equipment, we strive to make your life easy - from a quick quote turnaround to fast dispatch and leading after-sales support.

ADDRESS

16B Tarmac Way, Pakenham VIC 3810

OPENING HOURS

Monday to Friday 8:00am - 4:00pm (VIC)
Closed Weekends and all Public Holidays

Our Headquarters
QUICK QUOTE

Get a Quick Quote

If you require a quotation simply fill in your details with your product of interest and we will be in touch.